Compare Artex Textured Finish Ready Mixed 5L Prices

Add to Project Tell me when the price changes

Artex Textured Finish Ready Mixed 5L

Artex Textured Finish Ready Mixed is a textured finish for producing patterns on interior walls and ceilings. Ready to use.

Brand Name	Artex
Colour	N/A
Material	N/A
Manufacturer Model No	BC051510F
Wear Type	N/A
Type	Textured Finish
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Size	5L
Surface Preparation	Remove wallpaper and paste, and ensure all surfaces are sound, clean, non-dusting, free from grease and dry. Lightly sand gloss surfaces, wash the surface and allow to dry. Fill hairline cracks with Textured Finish. For large cracks and plasterboard jointing use a thick mix of Artex Textured Finish applied in conjunction with Artex Joint Tape. Allow to dry. Seal porous surfaces (such as new plaster, plasterboard and surfaces stripped of wallpaper and paste) and areas prepared with Artex Textured Finish, with Artex Sealer and allow to dry.
Application	Stir well before use. If more than one tub of Textured Finish is required combine the contents of the tubs in a large, clean container and stir well to an even consistency. Before application, practice texturing on a board until you achieve the desired effect. Using an Artex Laying-on Brush or a wide paintbrush, apply a generous, even coat of Textured Finish in 1 x 0.5 metre bands across the narrow ceiling width or down the wall. Pattern this band as you work, continue in this way across the entire surface, working quickly and carefully to blend in successive bands while the material is still wet. Finish by forming a narrow margin (13-25mm) around the wall/ceiling edge using a small paint brush. Clean splashes as you go using water.
Drying	To ensure best results, adequate ventilation must be provided to dry out the finished work. Drying time is normally 12-24 hours. If painting, leave for a further seven days in well ventilated conditions and paint with a good quality emulsion paint, following the paint manufacturers instructions for porous surfaces. The room temperature must remain above 5°C during application and until the material is completely dry. Textured Finish must not be applied over ceiling heating systems or on surfaces where the temperature is likely to reach 40°C.

Best Prices

Brewers Decorater Centre

£49.99

Best Price

Visit Site In stock

The prices shown are available online and may not reflect in store. Confirm prices before visiting store.

Trending Products

Popular Searches

How can we help?

Building Material Suppliers

Door Supplies

Hardware

Timber Sheet Materials

Construction Tools

Hand Tools

Power Tool Accessories

Power Tools

Workwear

House Paint

Paint

Painting Tools

Tiling & Flooring

Wallpaper

Woodcare

Floor Accessories

Floor Tiles

Flooring Supplies

Flooring tools

Tiling tools

Fencing

Garden Buildings

Garden Furniture

Garden Tools

Landscaping Supplies

Air Purification

Central Heating Systems

Heaters

Plumbing Supplies

Radiators

Bathroom Supplies

Home Appliances

Kitchen Supplies

Showers

Electrical Supplies

Home Security

Indoor lights

Outdoor Lights

Smart home

Artex Textured Finish Ready Mixed 5L

Additional Information

Best Prices

£49.99

Map View

You may also like

Dulux Trade Undercoat Brilliant White 2.5ltr

£37.42

Cheapest at Travis Perkins

Glass Cast SHIMR Metallic Resin Pigment Powder - Hot Pink 20g

£5.63

Cheapest at Industrial Tool Supplies

Sadolin Classic Wood Protection Jacobean Walnut 1 Litre

£20.79

Cheapest at Selco Builders Warehouse

Polycell Trade Polyfilla Decorator's Caulk 380ml - White

£2.99

Cheapest at Industrial Tool Supplies